Xtratherm Thermal Liner MechFix Wall Insulation - 2.4m x 1.2m x 72.5mm

Name: Xtratherm Thermal Liner MechFix Wall Insulation - 2.4m x 1.2m x 72.5mm
Brand: Xtratherm
SKU: XT TL-MF/72.5
Availability: LimitedAvailability

Code:

XT TL-MF/72.5

Brand:

Xtratherm

This item is out of stock and not available to purchase.

View alternative products

View full product details

View questions about this product

Create a wishlist

Lisa Courtney

Description

Xtratherm Thin-R XT/TL-MF Thermal Liner is a composite insulated panel of Xtratherm Polyiso (PIR) core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one operation for suitable masonry walls, sloped rafters and ceilings in new build and refurbishment situations. XT/TL-MF is only suitable for mechanical fixed applications.

Insulation for drylining walls mechanically fixed to battens.
Includes an integral vapour control layer.

Properties

Length: 2.4m.
Width: 1.2m.
Coverage: 2.88m2.
Insulation thickness: 60mm.
Plasterboard thickness: 12.5mm.
Total thickness: 72.5mm.
Edging: tapered edge.
Thermal conductivity: 0.022 W/mK.
Surface spread of flame: Class 1.
Certification: BBA certified.
Compressive strength: 140kPa.

Integral vapour control layer

The facing on Xtratherm boards provide a gas and vapour tight barrier, taping the joints between the aluminium facing, or taping and filling the joints on plasterboard finishes in accordance with drylining good practice, will result in a vapour control layer being created.

Cutting

Xtratherm Thin-R can be readily cut using a sharp knife or fine toothed saw. Ensure tight fitting of the insulation boards to achieve continuity of insulation as asked for in accredited details.

Storage

Xtratherm Thin-R should be stored off the ground, on a clean, flat surface and must be stored under cover. The polythene wrapping is not considered adequate protection for outside exposure.